Loading...

The open source protocol TUIO allows outputting the AirScan's multi touch data to other applications

This protocol is widely used around the world by many application developers and is a commonly known way to transmit the individual touches.

See a list of compatible software and operating system frameworks here:
http://tuio.org/?software

To use the AirScan with TUIO, set up the TUIO host IP and Port here and press [Apply]. The TUIO transmitter needs to be enabled by ticking the check box [Enable].

To start sending the AirScan's touch data, open the AirScan Tool and check the option [TUIO] inside the Multi Point Mode section.