Applies the "B&W Add" FX within an adjustable rectangular area with soft edges. It adds Black and White values to the RGB colors, the result can be inverted. Uses the color picker, with saturation set to 0 by default.

Applies the "B&W Multiply" FX within an adjustable rectangular area with soft edges. All RGB colors are multiplied by B&W color mix value, the result can be inverted.

Uses the color picker, with saturation set to 0 by default.

Applies the "B&W" FX within an adjustable rectangular area with soft edges. It turns the RGB image into Black and White, the result can be inverted.

Applies the "Bitone" FX within an adjustable rectangular area with soft edges. It turns the RGB image into just two colors, using Threshold. Both colors can be set by color pickers.

Applies the "BiTone Luma" FX within an adjustable rectangular area with soft edges. It colorizes the image based upon its luminance values in two colors, each for high (H) and low (L) levels, using color pickers.

Applies the "Color Stripes H" FX within an adjustable rectangular area with soft edges. It adds horizontal color stripes in different sizes.

Applies the "Color Stripes V" FX within an adjustable rectangular area with soft edges. It adds vertical color stripes in different sizes.

Applies the "Color Fade" FX within an adjustable rectangular area with soft edges. It fades all RGB colors to full RGB or CMY color saturation.

Applies the "ColorScroll Add" FX within an adjustable rectangular area with soft edges. It applies a color-changing effect to the layer texture by adding the RGB values.

Applies the "ColorScroll Multiply" FX within an adjustable rectangular area with soft edges. It applies a color-changing effect to the layer texture by multiplying the RGB values.

Applies the "ColorScroll Only" FX within an adjustable rectangular area with soft edges. It applies a color-changing effect to the layer texture by overlaying the original RGB values.

Applies an emboss effect with different angles in an adjustable rectangular area with soft edges.

Technical Information
This effect needs to be the first effect on the layer if you are working with images or videos (i.e. textures) that are bigger than the "Max. Internal Texture Size". The Internal Texture Size depends on your PB license and is adjustable in the Configuration tab under "Render Engine". The chapter "FX Order" explains how to drag effects in the Device Tree tab to change the order of applied effects.

Applies an emboss effect with a threshold in an adjustable rectangular area with soft edges.

Technical Information
This effect needs to be the first effect on the layer if you are working with images or videos (i.e. textures) that are bigger than the "Max. Internal Texture Size". The Internal Texture Size depends on your PB license and is adjustable in the Configuration tab under "Render Engine". The chapter "FX Order" explains how to drag effects in the Device Tree tab to change the order of applied effects.

Applies an emboss effect in an adjustable rectangular area with soft edges.

Technical Information
This effect needs to be the first effect on the layer if you are working with images or videos (i.e. textures) that are bigger than the "Max. Internal Texture Size". The Internal Texture Size depends on your PB license and is adjustable in the Configuration tab under "Render Engine". The chapter "FX Order" explains how to drag effects in the Device Tree tab to change the order of applied effects.

Applies the "Invert" FX within an adjustable rectangular area with soft edges. It inverts the RGB levels.

Applies the "Linear Light" FX within an adjustable rectangular area with soft edges.

Applies the "RGB Inversion" FX within an adjustable rectangular area with soft edges. It inverts the RGB levels with the possibility of setting RGB levels, Threshold and Radius.

Applies the "Sepiatone" FX within an adjustable rectangular area with soft edges. It tints the texture in sepia tones, amount is adjustable.

Applies the "Tone Mapping" FX within an adjustable rectangular area with soft edges. It allows to set Fog, Exposure, Gamma, Vignette and Blueshift to create a specific photo style.

Applies the "TriTone" FX within an adjustable rectangular area with soft edges. It colorizes the image based upon its luminance values in a mix of three colors, each for high (H), middle (M) and low (L) levels, using color pickers.