Project.Phidgets_PhidgetIR(deviceName or ID)

Example:
Project.Phidgets_PhidgetIR("Phidgets_PhidgetIR1").SubMember

Alternative Example:
Project.Phidgets_PhidgetIR(1).SubMember

This gives access to all further members of the device "Phidgets_PhidgetIR" from the Configuration dialog. Using the Project object is an alternative to addressing the device directly by entering its name. The Project object allows to address the device through its name or ID.

Substituting the ID with a dynamic variable allows automation. Actions can be performed on many devices of the same type simultaneously, e.g. by using for-loops:
For i = 1 to 10 {
  Project.Phidgets_PhidgetIR(i).Enable = False
}

Phidgets_PhidgetIRName.DeviceSerial

Example:
vint = Phidgets_PhidgetIR1.DeviceSerial

Alternative Example:
vint = Project.Phidgets_PhidgetIR(1).DeviceSerial

This member sets and returns the serial number which is displayed next to "Serial" in the Configuration menu when selecting the according Phidgets device.
The first example shows how to return the value to an integer variable named "vint".

You could also write it into a Widget, e.g. a Label via the script: Label1.Text = Phidgets_PhidgetIR1.DeviceSerial
or simply display it in the Debug Logger: DebugMessage(Phidgets_PhidgetIR1.DeviceSerial)

Example2:
Phidgets_PhidgetIR1.DeviceSerial = 530161

The second example shows, how to set the serial number of the device in the Configuration menu to 530161.

Phidgets_PhidgetIRName.Disable

Example:
Phidgets_PhidgetIR1.Disable

Alternative Example:
Project.Phidgets_PhidgetIR(1).Disable

This disables the Phidgets device in the Configuration dialog as if the "Enable" check box in the window was unchecked. Use the .Enable member to reverse this command.

Phidgets_PhidgetIRName.Enable

Example:
Phidgets_PhidgetIR1.Enable

Alternative Example:
Project.Phidgets_PhidgetIR(1).Enable

This enables the Phidgets device in the Configuration dialog as if the "Enable" check box in the window was checked. Use the .Disable member to reverse this command.

Phidgets_PhidgetIRName.IsConnected

Example:
vbool = Phidgets_PhidgetIR1.IsConnected

Alternative Example:
vbool = Project.Phidgets_PhidgetIR(1).IsConnected

This member returns the connection status for the Phidgets device as a Boolean value. The result is "True" if the device is connected and "False" if it is currently disconnected.
The first example shows how to use it with a Boolean variable named "vbool".

You could also write it into a Widget, e.g. a Label via the script: Label1.Text = Phidgets_PhidgetIR1.IsConnected
or simply display it in the Debug Logger: DebugMessage(Phidgets_PhidgetIR1.IsConnected)

Phidgets_PhidgetIRName.IsEnabled

Example:
vbool = Phidgets_PhidgetIR1.IsEnabled

Alternative Example:
vbool = Project.Phidgets_PhidgetIR(1).IsEnabled

This member returns the status of the check box "Enable" of the configuration dialog when selecting the according Phidgets device. The result, a Boolean value (or string), is "True" if the device is enabled and "False" if it is currently not enabled.
The first example shows how to use it with a Boolean variable named "vbool".

You could also write it into a Widget, e.g. a Label via the script: Label1.Text = Phidgets_PhidgetIR1.IsEnabled
or simply display it in the Debug Logger: DebugMessage(Phidgets_PhidgetIR1.IsEnabled)

Phidgets_PhidgetIRName.Send(table,Alias,repeatCount)

Example:
Phidgets_PhidgetIR1.Send("Phidgets_IRCodeTable1","Play",10)

Alternative Example:
Project.Phidgets_PhidgetIR(1).Send("Phidgets_IRCodeTable1","Play",10)

The Send member is used to send a learned code out via the device's IR diodes. The example refers to the IR Code Table named "Phidgets_IRCodeTable1" and a code named "Play" which is saved there. Both names are suggested by the ScriptAssistant. According to the repeatCount, the code is sent out 10 times.

If you would like to send an IR code that has not been stored in a code table, you could use the Phidgets_PhidgetIR1.SendRaw command.

Another possibility to send a learned code is using the member of the table: Phidgets_IRCodeTable1.Send

Phidgets_PhidgetIRName.SendRaw(data,carrierFrequency,dutyCycle,gap)

Example:
Phidgets_PhidgetIR1.SendRaw([list with integer values],int,double,int)

Alternative Example:
Project.Phidgets_PhidgetIR(1).SendRaw([list with integer values],int,double,int)

The SendRaw member is used to send a raw code out via the device's IR diodes. Please refer to the Phidgets SDK for more information, e.g. PhidgetIR - 1055_0B

Note that the alternative member Phidgets_PhidgetIR1.Send refers to an IR Code Table and previously learned codes, hence there is no need to enter the code parameters manually.